Multicast can be used to realize live view when the number of connecting Web clients exceeds the limit the NVR can accommodate.
1. Click System > Network > Multicast.
2. 2. Select the check box to enable multicast, and then enter the multicast IP and port number.
3. Click Apply to save the settings.
4. Log in to the Web client and set Live View Protocol to Multicast under Setup > Client.
Note: Set the multicast IP correctly. Multicast address is class D address with the range 184.108.40.206 through 220.127.116.11; some are for special use:
· 18.104.22.168--22.214.171.124 can be used on the Internet.
· 126.96.36.199-244.0.0.255: only for use on LAN.
· 188.8.131.52: all-hosts group address, which refers to all the multicast-capable hosts and routers on a physical network.
· 184.108.40.206: for all routers on this subnet.
· 220.127.116.11: for all OSPF routers.
· 18.104.22.168: for all PIMv2 routers.
· 22.214.171.124--126.96.36.199 are for private use like 192.168.x.x.
Multicast address, multicast media stream, third-party player, RTP protocol, network setup