HomeSupportFAQ
How to set Port Mapping?

Answer:

1. Click Setup > Network > Port. Go to Port Mapping tab.

2. Enable Port Mapping and select mapping type. If Manual is selected, then external ports must be configured (external IP is obtained automatically by the camera). If the configured port is occupied, then the Status will show Inactive.

3. Click Save.

 

TAGS:
Port setting, network setup, port mapping type

Back
Latest FAQ
What's the difference between admin & user? What brand of SD card can UNV IPC support? How to upgrade the device? How to set Recording & Snapshot plan? How to set Multicast Address?