Note: Only some certain network box camera support this function. Please see the actual model for details.
Note: Please use the lens with P-Iris control mode, and connect the iris control cable to the Z/F port of the camera.
Note: Iris can be set only when Lens Mode is set to P-IRIS.
1. Click Setup > Image > Image and then click Advanced.
2. Modify the settings as required. The following table describes some major parameters.
|Lens Mode||Z/F: to modify focus and zoom.|
P-Iris: to modify iris value.
|Aperture Control||Automatically or manually adjust iris.|
You can set this parameter only when Lens Mode is set to P-Iris.
|F-Number||Change aperture manually.|
3. To restore the default settings, click Default.
Image setting, image setup, iris control, P-IRIS