NSW2000-16T2GC-POE
16-Port PoE Switch

NSW2000-16T2GC-POE

16-Port PoE Switch

16×10/100Mbps Ethernet ports

2×Gigabit combo ports (RJ45 and SFP)

All 100Mbps ports support PoE

PoE complies with IEEE802.3af/at, up to 30W for single port

Up to 250m transmission distance on EXTEND mode

Easy to use, no need to configure

High quality with all metal housing

ItemDescription
Ports16×10/100Base-TX autosensing Ethernet ports(all support PoE)
2×Gigabit combo ports (RJ45 and SFP)
Port attribute10/100/1000Mbit/s transfer rate
Half-duplex, full-duplex and auto-negotiation
Auto MDI/MDIX
StandardsIEEE 802.3u 100BASE-TX
IEEE 802.3ab 1000BASE-T
IEEE 802.3z 1000BASE-X
ANSI/IEEE 802.3 NWay
IEEE 802.3x flow control
IEEE 802.3af PoE
IEEE 802.3at PoE
MAC4K
Packet forwarding rate6.55Mpps
Switching capacity8.8Gbps
EXTEND modeDisabled: all ports can communicate with each other, and monitoring optimization is disabled.
Enabled: Downlink ports can only communicate with uplink ports, monitoring optimization is enabled, and transmission distance can be extended to up to 250 meters.
Status LEDsLink/Act (steady green): link is normal
Link/Act (flashing green): data is being forwarded
Link/Act (off): no link
PoE (steady orange): the port is powering a powered device properly
PoE (off): the port is not connected to any powered device or is not supplying power
Power (steady green): AC input is normal
Power (off): AC input is abnormal
PoE802.3at/af Max PoE capacity: 250 W
Consumption≤ 300 W
AC voltage100-240 V
Operating temperature0°C-40°C (32°F-104°F)
Operating humidity10%-85%
Storage temperature-10°C-70°C (14°F-158°F)
Storage humidity10%-90%
Dimensions (W×D×H)440mm×280mm×44mm (17.3"×11"×1.7")